BRJBD - FULL FLEX UNIVERSAL LATEX MODIFIED (SUPP DA

  • MSDS: BRJBD
  • Manufacturer: TEC INC H B FULLER CO
  • Product Name: FULL FLEX UNIVERSAL LATEX MODIFIED (SUPP DA
  • National Stock Number: 8030-00N039223
Product Identification

Product ID:FULL FLEX UNIVERSAL LATEX MODIFIED (SUPP DA
MSDS Date:12/27/1989
FSC:8030
NIIN:00N039223
MSDS Number: BRJBD

Responsible Party
TEC INC/H B FULLER CO
315 SOUTH HICKS RD
PALATINE, IL 60067
US

Emergency Phone: 800-228-5635

Info Phone: 708-358-9500

Preparer: TOM CASSUTT

Cage: IO478

Contractor
TEC INC/H B FULLER CO
PALATINE, IL 60067 US

Telephone: 708-358-9500

Cage: IO478

Ingredients

PORTLAND CEMENT

CAS: 65997-15-1

RTECS: VV8770000

Fraction By Weight: >10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 40-50%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE & SKIN IRRITANT. EYE
CONTACT MAY BE ABRASIVE. CHRONIC: LONG-TERM EXCESSIVE CRYSTALLINE
SILICA EXPOSURE CAN CAUSE PERMANENT LUNG DAMAGE. CRYSTALLINE SILICA
HAS BEEN IDENTIFIED BY IARC AS A P ROBABLE HUMAN CARCINOGEN.
Explanation of Carcinogenicity:SILICA,CRYSTALLINE-QUARTZ:GROUP
2A(IARC),IARC MONOGRAPHS VOL 7,P.341.'87;(NTP)6'TH ANNUAL REPORT
'91.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PERSONS W/PRE-EXISTING LUNG
CONDITIONS MAY BE MORE SUSCEPTIBLE TO THE EFFECTS OF DUST EXPOSURE.

First Aid

First Aid:INGEST:GIVE ONE GLASS OF WATER OR MILK. CONSULT MD.
EYES:FLUSH IMMEDIATELY W/WATER FOR AT LEAST 15 MINS. GET IMMEDIATE
MEDICAL ATTENTION. SKIN:WASH AFFECTED AREA W/SOAP & WATER.
INHAL:REMOVE TO FRESH AIR.

Fire Fighting

Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE CONDITIONS
.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:SWEEP UP SPILLED MATERIAL. MOP UP RESIDUE
W/WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED PARTICULATE RESPIRATOR
RECOMMENDED IN SITUATIONS WHERE DUSTING MAY OCCUR.
Ventilation:NO SPECIAL REQUIREMENTS.
Protective Gloves:GLOVES RECOMMENDED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE WASH.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFRS TRADE NAME/PART NO:THINSET GRAY, TA-0390-DS

Chemical Properties

Appearance and Odor:SOLID.

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:NONE.

Disposal

Waste Disposal Methods:LANDFILL IN ACCORDANCE W/LOCAL, STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.